Xerox 721 Operator's Manual

Also see for 721: User guide Operator's manual Setup guide User guide Release note

Contents

Xerox 721 Operator's Manual Manual pdf 54 page image

PROBLEM SOLVING46 XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUALDoor Open Errors (U-XX)When the printer experiences a door open error, the followingoccurs:• The Door Open Indicator flashes orange.• An error code “U-XX” flashes.• For codes U-04 or U-14, the location of the open door is alsoshown by PF or EXIT.Error Code Cause TreatmentU-01 The Upper Drawer is open. Open and close the Upper Drawer.U-02 The Middle Drawer is open. Open and close the Middle Drawer.U-03 The Lower Drawer is open. Open and close the Lower Drawer.U-04 The Inner Transport is open. Close the Inner Transport.Note: When you turn the latch, confirmthat it is locked.U-06 Left Door is open. Close the Left Door.U-11 Manual Bypass Shelf is open. Open and close the Manual Bypass Shelf.U 10 A interlock is open. Reset the Manual Bypass Shelf, RightDoor, Top Rear Cover, Exit CoverU-12 Right Door is open. Close the Right Side Door.U-13 Top Rear Cover is open. Close the Top Rear Cover.U-14 Exit Cover is open. Close the Exit Cover.Thumping Noise in StandbyAfter 30 minutes of no use, the printer will reset the developermotor and enter an idle state. A loud “thump” noise will be heardas the motor resets. This is normal.Exp-CleanWire-CleanPaper Deck1 2 3 4Select CutMFD1D2D3 D4PFExitCopy Density Menu Enter OnlineDoor Open Indicator PF and Exit Error CordError Code