System Guide Gateway ConfigurationCommon Controller 2-7– The Marker Colorant Group– The Media Path Group– The Interpreters Group– The Channels Group– The Console Group– The Alerts Groups• Xerox General MIB file (uses only the 06gentc and 07genfiles)– The xcmGen Base Group– The xcmGen Trap Client Group– The xcmGen Trap View GroupNOTE: The other files in Xerox General MIB are not supported.NDS SetupWhen using Novell Netware, a preferred server needs to be setfor environments where there is more than one server on thenetwork. If you are running NDS in an environment with morethan one NDS server, to ensure optimal operation, you shouldspecify a preferred server. To do this, perform the following steps(you will need to know your NDS Tree, Context, and PreferredServer Names):1. Type su root and enter password when you are prompted.2. Type cd /opt/XRXnps/XRXnwqsgw/bin/.3. Type ./QServerSetup and select the return key.4. Select the appropriate option:• If there is already an existing NDS QServer Setup thatyou wish to add a Preferred server name to, select choice2.• If you are creating a new NDS QServer Setup with apreferred server name, select choice 1.5. Select choice 4 to list the current setups to make sure yourpreferred server was added successfully.6. Restart the DocuSP software.NOTE: If logging is enabled, you can check /opt/XRXnps/log/QServer.Debug.Log to make sure that connection is made withthe Preferred server. Ensure that jobs can be submitted fromNetware and properly received and printed.
