Xerox 6200DX - Phaser Color Laser Printer Network Manual

Also see for 6200DX - Phaser Color Laser Printer: Brochure & specs Setup and quick reference guide Paper guide Installation instructions Support guide

Contents

Xerox 6200DX - Phaser Color Laser Printer Network Manual Manual pdf 31 page image

Windows 2000/XP NetworkPhaser® 6200 Color Laser Printer 268. Click the Local Printer radio button.9. Click Next>.10. Click the Create a New Port radio button.11. Select the AppleTalk Printing Devices from the New Port Type pull-down menu.12. You are now presented with a list of zones discovered on the network. Double-click the ZoneName your printer is on to expand the list. Now select your printer from the list, and click OK.13. You may now capture the AppleTalk Device. With this action, you prevent others from printing tothis device. In most applications it is best to select No. If you are installing the printer port on aserver that acts as a single print queue for this device, then click Yes.14. Insert your printer’s Printer Installer and Utilities CD-ROM into your computer’s CD-ROMdisk drive and click Have Disk.15. Click the Browse button and select the directory containing the Windows 2000/XP drivers::\instal\win2k or :\instal\winxp, and then click Open.16. Select the *.INF file, then click OK.17. The Wizard returns you to the previous dialog. Verify that the path and file name are correct, andclick OK.18. At the next dialog, enter a name for the printer and select whether you want that printer to be thedefault, and then click Next>.19. If the printer is not shared, click Next>. To share the printer, enter a Share Name, check the sharecheckbox, and then click Next>.20. At the next dialog, it is recommended that you print a test print. Click Next>.21. The Completing the Add Printer Wizard window appears. If all the data presented is correct,click the Finish button. If not, click the button to correct any errors.22. Wait for the test print to print. A new dialog asks for confirmation of the test print; click Yes.23. Send a print job to the printer.24. Check the print job for print-quality. If print-quality problems exist or if the job does not print,refer to the Troubleshooting Guide on the Interactive Documentation CD-ROM to correct theproblem or access PhaserSMART from the Troubleshooting tab of your printer driver.Xerox TCP/IP Port MonitorThe Xerox installer for Windows automatically installs Xerox TCP/IP Port Monitor for thoseinstallations using the PCL 5c driver. The Xerox TCP/IP Port Monitor can be used to add or removeTCP/IP ports.Adding a port using Xerox TCP/IP Port Monitor1. To add a TCP/IP port, open the Printer Properties dialog box for the printer you would like toattach the new TCP/IP port.a. Click Start, scroll to Settings, and click Printers.b. Click your right-mouse button on the printer to which you want to attach the new TCP/IPport, and select Properties.2. Select the Details tab, and click the Add Port button.