Xerox 6200DX - Phaser Color Laser Printer Network Manual

Also see for 6200DX - Phaser Color Laser Printer: Brochure & specs Setup and quick reference guide Paper guide Installation instructions Support guide

Contents

Xerox 6200DX - Phaser Color Laser Printer Network Manual Manual pdf 22 page image

Phaser® 6200 Color Laser PrinterCopyright © 2002 Xerox Corporation. All Rights Reserved. 17Windows NT 4.x NetworkThis section provides installation and troubleshooting steps for Windows NT 4.x: Preliminary steps — see page 17. Quick CD-ROM install steps — see page 17. Other methods of installation — see page 18. Windows NT 4.x troubleshooting (TCP/IP) — see page 21. Windows NT 4.x troubleshooting (AppleTalk) — see page 22.Preliminary stepsThe preliminary steps given below must be accomplished for all printers regardless of the method that isbeing used.1. Verify that the printer is plugged in, turned on, and connected to an active network.2. Verify that the printer is receiving network traffic by monitoring the LED’s on the back of theprinter or on the CentreDirect External Print Server. When the printer is connected to afunctioning network receiving traffic, its link LED is green, and its traffic LED (amber) is flashingrapidly.3. Print the Configuration Pages and retain them for reference. For information on using the frontpanel or printing Configuration Pages, refer to the Front Panel section of the Features Guide ofthe Interactive Documentation CD-ROM.4. Check the Configuration Pages and verify that the desired protocol is enabled.5. Proceed to the Quick CD-ROM install steps or Other methods of installation section for theinstallation method desired.Quick CD-ROM install steps1. Insert your printer’s Printer Installer and Utilities CD-ROM into your computer’s CD-ROMdrive. If your PC is set to autorun, a Xerox installer should automatically start. If it does not start,do the following:a. Click Start and Run.b. In the Run window, type: :\INSTALL.EXE.2. Select your desired language from the list.3. Install the printer drivers for your printer. Within the Xerox installer, select Printer Drivers, andthen select Install Xerox Phaser 6200 Color Printer Drivers.4. Click Yes to accept the Xerox Software License Agreement.5. The Xerox installer searches the network and displays the first printer found. Click Next to acceptthis printer.