Xerox 6200DX - Phaser Color Laser Printer Network Manual

Also see for 6200DX - Phaser Color Laser Printer: Brochure & specs Setup and quick reference guide Paper guide Installation instructions Support guide

Contents

Xerox 6200DX - Phaser Color Laser Printer Network Manual Manual pdf 23 page image

Windows NT 4.x NetworkPhaser® 6200 Color Laser Printer 186. Click Next to accept the printer's default name or enter an alternate name, and then click SaveChanges before clicking Next.7. The information dialog box displays the files to be copied to your system. Click Next to install thefiles and Finish to complete the installation.Other methods of installationYour printer can also be installed on a Windows NT network using one of these methods: Microsoft TCP/IP protocol AppleTalk protocol The CentreWare IS program on your Advanced Printer Management Tools CD-ROM can alsobe used to monitor and configure the printer. If your printer is connected to a Windows NTnetwork with the TCP/IP protocol enabled, you can use a web browser to monitor and configureyour printer through CentreWare IS. For installing or managing multiple printers on a Windows NT network with the TCP/IP protocolenabled, you can use the Xerox CentreWare MC snap-in to Microsoft Management Console. Referto the Xerox CentreWare MC User Guide on the Advanced Printer Management ToolsCD-ROM. You can use Xerox TCP/IP Port Monitor to add or remove TCP/IP ports for installations using thePCL 5c driver.Quick install steps (Microsoft TCP/IP protocol)1. At the Desktop, right-mouse-click the Network Neighborhood icon and select Properties.2. Click on the Protocols tab and verify that the TCP/IP protocol has been loaded.3. Select the Services tab and verify that Microsoft TCP/IP Printing is loaded.4. If this software is not present, install it using the documentation provided by Microsoft, and thenreturn to this document.5. Open the Control Panel and double-click the Printers icon.6. Double-click Add Printer; the Add Printer Wizard starts.7. Verify that My Computer is selected and click Next>.8. Click Add Port.9. From the list that appears, select LPR Port.10. Click New Port. This opens up the Add LPR compatible printer window.11. Type the IP address of your printer and a printer name of up to 31 characters (no spaces).12. Select OK. The Wizard returns you to the previous dialog. Verify that the new IP address youentered is in the list and is correct. The check box to the left of the address must be checked; if it isnot, check it, and then select Next>.13. Insert your printer’s Printer Installer and Utilities CD-ROM into your computer’s CD-ROMdrive and click Have Disk.14. Click the Browse button and select the directory containing the Windows NT drivers.15. Select the *.INF file.