XEROX WIDE FORMAT COPY SYSTEM Special features keys • 65If the last job was a set, the settings that can be changed are displayedin a neutral state (the LEDs are off). Changing one of these settings willapply to all of the pages in the set. Some of the settings that can bechanged are: scale, page size, media type, margins, and justification.NOTE: The recalled job must be printed or cleared before the nextdocument can be scanned. If there is no last job to be restored, as is thecase at power up or after the last job has been deleted, a warningmessage will advise you.If, for security reasons, the parameters and images of the last job shouldnot be left stored, use the DELETE LAST JOB option.To delete the information from the last job:1. Press the Store/Recall key. The STORE/RECALL menu screenis displayed.2. Press the Enter key to select LAST JOB. The LAST JOB menuscreen is displayed.3. Press the Next key to highlight DELETE LAST JOB.4. Press the Enter key to select DELETE LAST JOB. A deleteconfirmation screen is displayed. The default response is NO.DELETE LAST JOBARE YOU SURE ?: NODelete Last Job Screen5. Press the Previous or Next key to change the response to YES.6. Press the Enter key to confirm the deletion. The screen shownbelow is displayed. The last job images and parameters aredeleted.LAST JOB PARAMETERS ANDIMAGES ARE NOT AVAILABLEPRESS ENTER TO CONTINUEJob Parameters and Images Screen7. Press the Enter key to return to the READY screen.The JOB TEMPLATES option of the STORE/RECALL menu provides asub-menu of the following choices:• RECALL TEMPLATE - Enables you to recall saved settings.• SAVE TEMPLATE - Enables you to save job settings in memory.• DELETE TEMPLATE - Enables you to delete saved settings.Reprinting withChanged FeaturesDeleting the Last JobJob Templates
