30 • Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEMPowering the Xerox 6204 WideFormat Solution On/OffThe following describes the procedure for powering the Xerox 6204 WideFormat Solution with FreeFlow Accxes Print Server on and off.1. Move the printer circuit breaker switch up, to the On [ | ] position.2. Move the printer power switch to the On [ | ] position.3. Press the power button on the front of the controller.The power button lamp will illuminate. After about one-half minute,the control panel will display the message Printer Warming Up. Themachine will be print-ready in about three minutes.CAUTION Powering down the system incorrectly may result in datacorruption and a service call. The system shutdown procedure belowallows the controller to power down correctly. Shutdown is bestperformed through the Web Print Management Tool or the controlpanel’s System Administration menu’s [Shutdown] feature. Onlyauthorized persons should power down the system fully.1. Ensure that all jobs have finished processing, and that the indicator on the control panel is not illuminated.2. Select [Shutdown] from either the control panel or the Web PrintManagement Tool.From the control panelSelect the button, enter the System Administrationpassword, and then select the [Shutdown] button.Powering On theSystemPowering Off theSystemPower ButtonCircuit BreakerPrinter PowerSwitch
