XEROX WIDE FORMAT COPY SYSTEM Main Menu • 131Select the LEAD EDGE/TRAIL EDGE option to execute the leadedge/trail edge adjustment diagnostic.To run the LEAD EDGE/TRAIL EDGE diagnostic:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Next key until DIAGNOSTICS is highlighted.3. Press the Enter key to select DIAGNOSTICS. TheDIAGNOSTICS menu screen is displayed.4. Press the Next key until SCANNER DIAGNOSTICS is displayed.5. Press the Enter key to select SCANNER DIAGNOSTICS. TheSCANNER DIAGNOSTICS menu screen is displayed.6. Press the Next key until COMPONENT TESTS is highlighted.7. Press the Enter key to select COMPONENT TESTS. TheCOMPONENTS TESTS menu screen is displayed.8. Press the Enter key to select LEAD EDGE/TRAIL EDGE. TheLEAD EDGE/TRAIL EDGE ADJUSTMENT screen is displayed.LEAD EDGE/TRAIL EDGEADJUSTMENTPRESS START TO BEGINLead Edge/Trail Edge Adjustment Screen9. Insert a black sheet (8.5 X 11) of paper into the Scan System.10. Press the Start key to begin the diagnostic. When the diagnosticcompletes, the last line of the display is replaced with a statusline indicating PASS or FAIL. The last line may also display asNO RESPONSE FROM SCANNER if the Scan System does notprocess the request within the timeout period.11. Press the Enter key to return to the COMPONENT TESTS menuscreen.Select the SENSORS option to display the current state of the ScanSystem optical paper sensors, calibration home sensor, and the thickdocument sensor.To display the status of the sensors:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Next key until DIAGNOSTICS is highlighted.3. Press the Enter key to select DIAGNOSTICS. TheDIAGNOSTICS menu screen is displayed.4. Press the Next key until SCANNER DIAGNOSTICS is displayed.LEAD EDGE/TRAILEDGESENSORS
