Ublox TOBY-R2 Series System Integration Manual

Also see for TOBY-R2 Series: User guide

Contents

Ublox TOBY-R2 Series System Integration Manual Manual pdf 57 page image

TOBY-R2 series - System integration manualUBX-16010572 - R10 System description Page 57 of 151Description Registry valueTLS_RSA_WITH_AES_128_CBC_SHA 0x00,0x2F YESTLS_RSA_WITH_AES_128_CBC_SHA256 0x00,0x3C YESTLS_RSA_WITH_AES_256_CBC_SHA 0x00,0x35 YESTLS_RSA_WITH_AES_256_CBC_SHA256 0x00,0x3D YESTLS_RSA_WITH_3DES_EDE_CBC_SHA 0x00,0x0A YESTLS_RSA_WITH_RC4_128_MD5 0x00,0x04 NOTLS_RSA_WITH_RC4_128_SHA 0x00,0x05 NOTLS_PSK_WITH_AES_128_CBC_SHA 0x00,0x8C YESTLS_PSK_WITH_AES_256_CBC_SHA 0x00,0x8D YESTLS_PSK_WITH_3DES_EDE_CBC_SHA 0x00,0x8B YESTLS_RSA_PSK_WITH_AES_128_CBC_SHA 0x00,0x94 YESTLS_RSA_PSK_WITH_AES_256_CBC_SHA 0x00,0x95 YESTLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA 0x00,0x93 YESTLS_PSK_WITH_AES_128_CBC_SHA256 0x00,0xAE YESTLS_PSK_WITH_AES_256_CBC_SHA384 0x00,0xAF YESTLS_RSA_PSK_WITH_AES_128_CBC_SHA256 0x00,0xB6 YESTLS_RSA_PSK_WITH_AES_256_CBC_SHA384 0x00,0xB7 YESTable 18: TLS cipher suite registry1.14.9 Bearer Independent ProtocolThe Bearer Independent Protocol (BIP) is a mechanism by which a cellular module provides a SIM withaccess to the data bearers supported by the network. With the BIP for Over-the-Air SIM provisioning,the data transfer from and to the SIM uses either an already active PDP context or a new PDP contextestablished with the APN provided by the SIM card. For more details, see the u-blox AT commandsmanual [2].1.14.10 AssistNow clients and GNSS integration☞ AssistNow clients and u-blox GNSS receiver integration are not supported by TOBY-R200-02B-00and TOBY-R202-02B-00 type numbers.For customers using u-blox GNSS receivers, the TOBY-R2 series cellular modules feature embeddedAssistNow clients. AssistNow A-GPS provides better GNSS performance and fasterTime-To-First-Fix. The clients can be enabled and disabled with an AT command (see the u-blox ATcommands manual [2]).TOBY-R2 series cellular modules act as a stand-alone AssistNow client, making AssistNow availablewith no additional requirements for resources or software integration on an external host microcontroller. Full access to u-blox GNSS receivers is available via the TOBY-R2 series cellular module,through the DDC (I2C) interface, while the available GPIOs can handle the positioning chipset / modulepower-on/off. This means that cellular module and GNSS receiver can be controlled through a singleserial port from any host processor.