U-Line CLR2060 Installation Manual

Also see for ECHELON CLR2060: Supplementary guide Supplementary guide Supplementary guide Service and parts manual User manual

Contents

U-Line CLR2060 Installation Manual Manual pdf 4 page image

CLR2060 — Clear Ice Makerwww.U-LineService.com 4 02/2005™Your U-Line product has been designed for either free-standing or built-in installation. When built-in, your unitdoes not require additional air space for top, sides or rear.However, the front grille must NOT be obstructed andclearance is required for water, drain and electricalconnections in the rear.Note: Unit can NOT be installed behind a closed cabinetdoor.Cut-Out DimensionsFollow the cut-out drawing in Figure 1. The 15-3/16"width allows 1/4" for ease in installation and removal ofthe unit. The 24" depth is the counter depth in mostinstallations. The unit is 24" deep including the handleon Black and White models and 24" deep including thedoor and not the handle on Stainless Steel models (seeFigure 2).IMPORTANTIf you would like to align the face of the unit with otheradjacent cabinet doors in certain installations, you mayneed to alter the wall just behind the drain connection onthe unit to accommodate the drain. The actual amount ofalteration will be determined by your actual drainconnection components.Product DimensionsPlease note that the unit has adjustable feet that can addone additional inch to height during leveling or to matchadjacent cabinets (see Figure 44 on Page 17.)Door Swing/Clearances InformationBlack and White units have a zero clearance for the doorto open 90° (see Figure 3). Stainless Steel models requirea minimum of 2-1/8" door clearance to accommodate thehandle if the unit is installed next to a wall or similar typeof structure.3 Prepare SiteSee ElectricalSpecificationsfor Power Supply34-1/4"to35-1/8"15-3/16"8"24"Figure 134-1/8"34-1/8"26-1/8"IncludingHandle24"IncludingHandle14-15/16"Black and White14-15/16"Stainless SteelFigure 21/4" Min.Wall21-3/4"Wall16-1/2"21-3/4"16-1/2"2-1/8" Min.90°Door Swing90°Door SwingBlack and White Stainless SteelFigure 3