02/2005 3 www.U-LineService.com™ 2015WC/2015WCOL Wine Captain ®General PrecautionsUse this appliance for its intended purpose only andfollow these general precautions along with those listedthroughout this guide:WARNINGSHOCK HAZARD — Electrical Grounding Required.• Keep the unit unplugged throughout installationexcept during testing.• Never remove the round grounding prong fromthe plug and never use a two-prong groundingadapter.• Never use an extension cord to connect power tothe unit.• Always keep your working area dry.CAUTION• Use care when moving and handling the unit. Usegloves to prevent personal injury from sharp edges.• Do not lift the unit by the door or door handle.• Do not install the unit behind closed doors or in anyway that would obstruct airflow to the front grille,which may cause the unit to malfunction.You have received a carton containing your 2015WC or2015WCOL Wine Captain ® with a package insidecontaining a User Manual, a Product Registration Cardand an Anti-Tip Bracket Installation Kit. 2015WCOL unitsare shipped with a cardboard-wrapped door and anadditional package of hardware. Complete and mailthe Product Registration Card or register online atwww.U-LineService.com. Once your unit is installed, keepthe User Manual and this Installation Guide in a safe placefor future reference.2015WC units are Black, White or Stainless Steel. Blackand White units have a reversible door with a slightlycontoured handle across the top. Stainless Steel units arecovered with a protective coating and have been orderedleft- or right-hand hinged. The Stainless doors are notreversible.2015WCOL units are Black with an unattached door thatrequires the construction of a 3/4-inch thick wood overlayframe. You must determine left- or right-hand openingbefore construction.All units come with maple trim wine racks that can befinished or stained. Please carefully follow the directionsthat apply to your unit and your intended design.Tools/Materials Required• 7/64" Allen wrench (included in 2015WCOL hardware)• Screwdrivers — slotted and Phillips head• Sandpaper; low odor, water clean up, quick dryingfinish; tack cloth and, if desired, water-based woodstain and synthetic foam brush• 3/4-inch overlay frame material, cutting tools, drill andbits (2015WCOL units)InspectionUnwrap and inspect the unit on a flat, level surfacecapable of supporting its entire weight.Removing Protective Coating(Stainless Steel Units Only)When inspecting/installing a Stainless Steel unit, theprotective coating covering the unit must be removedfirst. Start at a corner of the unit/door and pull back theprotective coating to remove it from the unit/door.2 Inspect and Plan