Paper TypeYou can set the display so you can see what type of paper is loaded in the paper tray.The print function uses this information to automatically select the paper tray.The paper types you can set for Tray 7 are as follows:[Do not Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Yellow],[Green], [Blue], [Purple], [Ivory], [Orange], [Pink], [Red], [Gray], [Letterhead], [Translucent Paper],[Preprinted Paper], [OHP (Transparency)], [Bond Paper], [Cardstock], [Prepunched Paper], [TabStock]Paper ThicknessThe paper thicknesses you can set for Tray 7 are as follows:• Plain Paper52 - 105 g/m2 (14 - 28 lb BOND)• Middle Thick106 - 163 g/m2 (28 lb BOND - 90 lb INDEX)• Thick Paper 1164 - 216 g/m2 (90 lb INDEX - 80 lb COVER)• Thick Paper 2217 - 256 g/m2 (80 lb COVER - 140 lb INDEX)The default setting for "Paper Type" is Do not Display.The default setting for "Paper Thickness" is Plain Paper.The default setting for "Apply Duplex" is Yes.The default setting for "Apply Auto Paper Select" is Yes.The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".For details about the relations between possible paper sizes and thickness, see "Recommended PaperSizes and Types", About This Machine.For details about the recommended conditions for using thick paper, see "Thick Paper", About ThisMachine.The optional tab sheet holder is required when using tab stock in Tray 7.The Tab Position Shift can be set in millimeters, when Tab Stock has been selected.The Tab Position Shift can be set in 1 inch (1 millimeter) units, within a range of 0 to 0.6 inches (0 to15 mm). The default is "0.5" inches (13 mm).Designation Sheet 1 - 9You can specify and display the paper tray to set designation sheets. You can also specify the displaytime and copying method for two sided copying.• Select Designation Sheet from 1-92. Tray Paper Settings902
