• Display TimeYou can select [At Mode Selected] or [Full Time].Separation Sheet TrayYou can specify and display the paper tray in which to set slip sheets. You can also specify the displaytime.• Display TimeYou can select [At Mode Selected] or [Full Time].Tray 3Paper SizeThe paper sizes you can set for Tray 3 are as follows:• [Auto Detect]• 13×18 , 12×18 , 11×17 , 11×15 , 11×14 , 10×15 , 10×14 ,81/2×14 , 81/2×13 , 81/2×11 , 81/4×14 , 81/4×13 , 8×13 , 8×10 ,71/4×101/2 , 51/2×81/2 , A3 , A4 , A5 , B4 JIS , B5 JIS , SRA3 ,SRA4 , 310×432 mm , 226×310 mm , 8K , 16K• 81/2×11 , 71/4×101/2 , 51/2×81/2 , A4 , A5 , B5 JIS , SRA4 ,226×310 mm , 16K• [Custom Size]You can specify a custom size of between 5.5 - 13.0 inches (139.7 - 330.2 mm) vertically, andbetween 5.5 - 18.03 inches (139.7 - 458.0 mm) horizontally.The default setting is Auto Detect.• For details about paper sizes that can be automatically detected, see "Recommended PaperSizes and Types", About This Machine.Paper TypeYou can set the display so you can see what type of paper is loaded in each paper tray.The print function uses this information to automatically select the paper tray.The paper types you can set for Tray 3 are as follows:[Do not Display], [Recycled Paper], [Special Paper], [Color Paper 1], [Color Paper 2], [Yellow],[Green], [Blue], [Purple], [Ivory], [Orange], [Pink], [Red], [Gray], [Letterhead], [Translucent Paper],[Preprinted Paper], [Bond Paper], [Cardstock], [OHP (Transparency)], [Prepunched Paper]Paper ThicknessThe paper thicknesses you can set for Tray 3 are as follows:Items of Tray Paper Settings732
