Timer SettingsThis section describes the user tools in the Timer Settings menu under System Settings.Auto Off Timer (Type 1)After a specified period has passed, following job completion, the machine automatically turns off,in order to conserve energy. This function is called "Auto Off".The machine status after the Auto Off operation is referred to as "Sleep mode".For the Auto Off Timer, specify the time to elapse before Auto Off.The default setting is "90" min.The time can be set from 10 seconds to 240 minutes, using the number keys.Auto Off may not work when error messages appear.Auto Off Timer (Type 2,3)After a specified period has passed, following job completion, the machine automatically turns off,in order to conserve energy. This function is called "Auto Off".The machine status after the Auto Off operation is referred to as "Sleep mode".For the Auto Off Timer, specify the time to elapse before Auto Off.The default setting is "120" min.The time can be set from 10 seconds to 240 minutes, using the number keys.Auto Off may not work when error messages appear.Energy Saver TimerSet the amount of time the machine waits before switching to lower-power mode after printing hasfinished or the last operation is performed.The time can be set from 1 to 240 minutes, using the number keys.The default setting is "15" minute (s).Panel Off TimerSet the amount of time the machine waits before switching the panel off after copying has finished orthe last operation is performed.Enter a time interval between 10 seconds and 240 minutes, using the number keys.The default setting is "1" minute (s).System Auto Reset TimerThe System Reset setting automatically switches the screen to that of the function set in Function Prioritywhen no operations are in progress, or when an interrupted job is cleared. This setting determines thesystem reset interval.The time can be set from 10 to 999 seconds, using the number keys.The default setting is [On], "60" second (s).Timer Settings291
