You can select [At Mode Selected] or [Full Time].• Apply DuplexYou can select [Yes] or [No].Slip Sheet TrayYou can specify and display the paper tray in which to set slip sheets. You can also specify the displaytime.• Display TimeYou can select [At Mode Selected] or [Full Time].Separation Sheet TrayYou can specify and display the paper tray in which to set slip sheets. You can also specify the displaytime.• Display TimeYou can select [At Mode Selected] or [Full Time].Tray 5 (with the optional Wide Large Capacity Tray)Paper SizeThe paper sizes you can set for Tray 5 (with the optional Wide LCT) are as follows:• [Auto Detect]• 13×191/5 , 13×19 , 13×18 , 12×18 , 123/5×191/5 , 123/5×181/2 ,11×17 , 11×15 , 11×14 , 10×15 , 10×14 , 81/2×14 , 81/2×13 ,81/2×11 , 81/4×14 , 81/4×13 , 8×13 , 8×10 , 71/4×101/2 , 51/2×81/2 ,A3 , A4 , A5 , A6 , B4 JIS , B5 JIS , B6 JIS , SRA3 , SRA4 ,310×432 mm , 226×310 mm , 210×340 mm , 8K , 16K• 81/2×11 , 71/4×101/2 , 51/2×81/2 , A4 , A5 , B5 JIS , SRA4 , 226×310 mm ,182×210 mm , 170×210 mm , 16K• [Custom Size]You can specify a custom size of between 5.5 - 13.0 inches (139.7 - 330.2 mm) vertically, andbetween 5.5 - 19.2 inches (139.7 - 487.7 mm) horizontally.You can specify a custom size between 3.94 - 5.5 inches (100.0 - 139.7 mm) horizontally. To usethe custom size paper, additional setup is required. For details, contact your service representative.The default setting is Auto Detect.• For details about paper sizes that can be automatically detected, see "Recommended PaperSizes and Types", About This Machine.2. Tray Paper Settings822
