Toshiba TH Series Instruction Manual

Also see for TH180: Instruction manual Maintenance manual

STE 73995– 15 –TRANSPORTATION AND INSTALLATION MANUAL1.2.3 Transporting the ControllerDisconnect all cables and teach pendant before transporting the controller.! DANGER• When placing the controller on the floor, etc., make sure not to catch yourhands or feet.1.3 StorageAvoid storing the robot and controller for long periods of time after unpacking them. Ifthis is unavoidable, however, strictly observe the following precautions for storage.1.3.1 Storage Precautions for the RobotIt is recommended to secure the robot in the shipment posture, using the attachedclamp for transport.! CAUTION• Secure the base completely to prevent the robot from falling over. Whenplaced directly on the floor, the robot is unstable and will fall over.• Keep the robot out of direct sunlight. The timing belts and resin coversmay deteriorate.• Seal the robot in a vinyl bag to prevent rust development and contaminant.Put a desiccant in the bag to absorb moisture. As the tool shaft issusceptible to rust development, coat it with rust-preventive agent or grease.1.3.2 Storage Precautions for the Controller! CAUTION• Keep the controller out of direct sunlight. Otherwise, the controller interiorwill be excessively heated up, causing a trouble.