Groundsmaster 4100--D/4110--DHydraulic System Page 4 -- 28High Flow Hydraulic Filter KitThe high flow hydraulic filter kit is designed with largeflow (40 GPM/150 LPM) and high pressure (5000PSI/345 bar) capabilities. This kit provides for bi--direc-tional filtration which prevents filtered debris from beingallowed back into the circuit regardless of flow direction.If a component failure occurs in the closed loop tractioncircuit, contamination from the failed part will remain inthe circuit until removed. When connecting hydraulictest gauges in order to test traction circuit componentsor after replacing a failed traction circuit component (e.g.hydrostat or wheel motor), the high flow hydraulic filtercan be installed in the traction circuit. The filter will en-sure that contaminates are removed from the closedloop and thus, do not cause additional component dam-age.Toro Part Number: TOR6011NOTE: This kit does not include hydraulic hoses (seeHydraulic Hose Kit TOR6007 above).NOTE: Replacement filter element is Toro part numberTOR6012. Filter element cannister tightening torque is25 ft--lb (34 N--m).Figure 21O--Ring KitThe O--ring kit includes O--rings in a variety of sizes forface seal and port seal hydraulic connections. It is rec-ommended that O--rings be replaced whenever a hy-draulic connection is loosened.Toro Part Number: 117--2727Figure 22
