Cleaning the Axle BreathersService Interval: Every 300 hours1. Clean the area around the breathers with a cleaningsolvent (Figure 73 and Figure 74).Figure 731. Front axle 3. Breather fitting2. Breather portFigure 741. Rear axle 3. Breather fitting2. Breather port2. Remove the breather from the front axle (Figure 73).3. Remove the breather from the rear axle (Figure 74).4. Clean the breathers with a cleaning solvent.5. Use compressed air to dry the breathers.Important: Wear face protection when usingcompressed air.6. Install the breather in the front axle (Figure 73).7. Install the breather in the rear axle (Figure 74).53
