Sony Betacam SX DNW-A100 Maintenance Manual

6-118 DNW-A100/A50/A45DNW-A100P/A50P/A45P(3) Turn on the POWER switch of DNW, then confirm that the operation system is in the standardsystem.nThe operation system can confirm with the 525 or 625 indicator on the lower control panel.If DNW is under another system, return it to the standard system with the setup menu ITEM-013 :525/625 SYSTEM SELECT. (Refer to Section 7-2-2 in the operation manual.)ImportanceIf the 525/625 line system is changed, the signal that had recorded on the HDD is erased.Model Standard system Another systemDNW-A100/A50/A45 Lights 525 indicator Lights 625 indicatorDNW-A100P/A50P/A45P Lights 625 indicator Lights 525 indicator(4) To light the PB.EE indicator, push the PB.EE button on the lower control panel.Lower Control Panel(5) Setting of the setup extend menu (in the standard system)For DNW-A100P/A50P/A45P: None.For DNW-A100/A50/A45:Set the SUB-ITEMs of ITEM-709 and ITEM-713 as shown below.nReturn the SUB-ITEMs to their previous settings in “7. Standard System Completion” (after adjust-ments in the standard system are completed).ITEM SUB-ITEM Setting Previous setting (fill up)709 : CAV LEVEL FORMAT 1. OUTPUT CAV LEVEL B-CAM713 : VIDEO SETUP REFERENCE LEVEL 0. MASTER LEVEL 0.0%1. INPUT LEVEL MSTER2. V BLK REMOVE CNT REMOV3. BETACAM PB LEVEL MSTER4. OUTPUT LEVEL MSTER6-9. VPR-17 Board ReplacementASSEMBLE/ALL VIDEOEDITINGMODE VI TC UB INTRP A IN DF LTC VITC 8F 4F 2FA OUT TCG TOTAL REMAIN 525 625EVENT%DOLBYNRCONFI ONPB EERECALL DELETEPREVIEW/REVIEW AUTO EDITAUDIOSERVOIN AUDIO OUTOUTINEVENT STANDBYENTRYPLAYER RECORDERVARFORWARDJOGSHUTTLEPREROLL RECEJECT REW PLAY F FWD STOPREVERSEDISKBUSYPB MENU SET HOLD CTL/TC/UB RESETCHCONDITIONCAPSTANLOCKKEYINHIBITSIMPLEEDITALARMBETACAMSXINSOVLUNDO FEEDINDEXCH-1 CH-2 CH-3 CH-4 TOTAL/REMAINRECINHIBITFULLEDITDISKMASTERDISKPROGRAMTAPEEXTPB.EE: Lights525 indicator625 indicatorThis figure is the DNW-A100/A100P.