Menu
Sony BKP-5090 Installation And Maintenance Manual
                                                                                                                                          | |
4-19 (E)BKP-50904-1. Setup Menu (BVP-500 series)4-1-6. System Config MenuPage Ver. Item Settings ContentsOthers2 F Tally RVS [On], Off Selects the operation mode of TALLY lamps corresponding to a CALLbutton pressed when a TALLY signal is input to the camera from CCUor VTR.On : Red TALLY lamps of VF and UP TALLY lamps of VF andcamera go out.Off : Red TALLY lamps of VF alone go out.CHAR CAM No. 1,2,3 , A,B,C Selects the indication mode of the camera number set by the CAMERAID. page of Operation menu.1, 2, 3 : Indicates in numerics.A, B, C : Indicates camera numbers 1 to 27 in alphabetical order of A to Z.(When connecting 28 or more cameras, select “1,2,3”.)WHT Setup [AWB], LEVEL AWB : After executing the Auto Level, white balance adjustmentMode data returns to the value before execution.LEVEL : After executing the Auto Level, white balance adjustmentdata changes to the value after the white balance is adjustedusing Test 2 signal.AW Shading [RGB], RB Only RGB : When automatically adjusting the white balance, R, G, andMode B signal waveforms are all flattened.RB Only : When automatically adjusting the white balance, R and Bsignal waveforms are flattened.Talk Priority [TALK|1], TALK 2 (Does not function in the unit.)Canon U-4 On, [Off] (Does not function in the unit.)ModeW Gain On, [Off] Turn the function on and off to select up to 36 dB master gain for eachgain switch position (LOW, MIDDLE, HIGH) of RM-P9 when thestandalone unit is installed in the unit(This function is sometimes not activated depending on the type of OHBwhich is incorporated in the camera.)Sensitivity [0], 6 dB 0: Normal mode6: Select only when the gain is raised by 6 dB on the spot |
Related manuals for Sony BKP-5090
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved