Menu
Sony BKP-5090 Installation And Maintenance Manual
                                                                                                                                          | |
3-2 (E) BKP-5090DISP switchON : Displays characters and messages indicating the video camera settings and operation status.OFF : No character or marker display appears on the viewfinder screen.MENU : The setup menu appears on the viewfinder screen.MENU SEL switchSelects the menu item or setting value displayed on the viewfinder screen.CANCEL buttonCancels the contents of a menu setting, or returns to the page select mode or TOP menu.nThe TOP menu screen indicates the entire configuration of menu items.To display the TOP menu, set the DISP switch to MENU (from OFF) while holding down the MENUSEL switch...... Basic Operation1. Displaying the menuTo display the Operation menu, set the DISP switch to MENU.To display the other menus than the Operation menu, first of all, the TOP menu shall be displayed.To display the TOP menu, set the DISP switch to MENU while holding down the MENU SELswitch. Then turn the MENU SEL switch to move the cursor to a menu item which you want andpress the MENU SEL switch.2. To shift the page, turn the MENU SEL switch with a page scroll bar displayed at the top-right of thescreen until the desired page is displayed and press the MENU SEL switch.The menu enters the item select mode and the page scroll bar disappears.3. To shift the item, turn the MENU SEL switch until the → cursor points the item to be set and pressthe MENU SEL switch.4. To change the value, turn the MENU SEL switch. You can change the values quickly by turningthe MENU SEL switch fast. You can make very fine adjustments by turning the switch slowly. Bypressing the MENU SEL switch, the setting is entered.5 The menu page is returned to the item select mode or page select mode every time the CANCELbutton is pressed.6. To exit from the setup menu, set the DISP switch to OFF...... ROM versionContents in the menu and factory settings may differ from the descriptions in this manual depending onthe version of ROM (IC36) on the AT-126 board.In this section, an item under “Ver.” in the table shows a ROM version. If any version is given, it showsthat the function for the item is added or changed, and the ROM with that version or higher versionsupports the function. If no version is given, it shows that every ROM version supports the function.To confirm the ROM version easily proceed as follows:1. Set the DISP switch to OFF.2. Power the unit on while holding down the MENU SEL switch. The indication of ROM versionis displayed for about three seconds.3-1. Setup Menu (BVP-550 series) |
Related manuals for Sony BKP-5090
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved