Menu
Sony BKP-5090 Installation And Maintenance Manual
                                                                                                                                          | |
3-11 (E)BKP-50903-1-3. Maintenance MenuThe Maintenance menu is used for encoder output level and other adjustments items necessary forcamera’s maintenance. The Maintenance menu is not normally accessible. To display this menu, switchsetting of the AT-126 board is required.To activate the Maintenance menu, first display the TOP menu.(Boxed items under “Settings” indicate the factory setting.)Page Ver. Item Settings ContentsVBS SYNC Level _99 to 99 ([XX]) Adjusts the sync level of camera’s encoder output signal.Y Level _99 to 99 ([XX]) Adjusts the Y level of camera’s encoder output signal.Burst Level _99 to 99 ([XX]) Adjusts the burst level of camera’s encoder output signal.Chroma Level _99 to 99 ([XX]) Adjusts the chroma level of camera’s encoder output signal.Q/V Level _99 to 99 ([XX]) Adjusts the Q (or V) level of camera’s encoder output signal.Setup Level _99 to 99 ([XX]) Adjusts the sync level of camera’s encoder output signal.(This setting is valid only for NTSC.)BF Phase _99 to 99 ([XX]) Adjusts the burst phase of camera’s encoder output signal.SC-H Phase _99 to 99 ([XX]) Adjusts the SC-H phase of camera’s encoder output signal.V Blanking 19, [20], 21H Adjusts the V blanking width of camera’s encoder output signal.(This setting is valid only for NTSC.)In connection with CCU, the width is fixed to 19H.* For a PAL model, the width is fixed to 25H at all times.White Shading V Saw R/G/B _99 to 99 ([XX]) Adjusts the volume of V.Saw compensation for the R, G, or B whiteshading.V Para R/G/B _99 to 99 ([XX]) Adjusts the volume of V.Para compensation for the R, G, or B white shading.H Saw R/G/B _99 to 99 ([XX]) Adjusts the volume of H.Saw compensation for the R, G, or B white shading.H Para R/G/B _99 to 99 ([XX]) Adjusts the volume of H.Para compensation for the R, G, or B white shading.White R/G/B _99 to 99 ([XX]) Adjusts the R, G, or B white level.V MOD R/G/B/M _99 to 99 ([XX]) Adjusts the volume of V.Saw compensation for the R, G, B or mastermodulation shading of the lens and prism. j)V MOD On, [Off] Turns the V modulation shading on and off.Auto White Press MENU SEL Starts to automatically adjust the white balance.switch to execute.Clear Press MENU SEL Resets numeric settings to “0” on the White Shading page.switch to execute. (When you press the MENU SEL switch, the “Clear” indication flashes.Press the MENU SEL switch again to execute; press CANCELbutton to cancel.)j) When the master modulation shading is adjusted, the V. Saw component for the R and B V-modulation shadings of the prism issimultaneously compensated.3-1. Setup Menu (BVP-550 series)3-1-3. Maintenance Menu |
Related manuals for Sony BKP-5090
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved