Siemens Sinumerik 840D Series Function Manual

Also see for SINUMERIK 840D: Function manual Function manual Function manual Equipment manual Programming manual

Contents

10.035.2 System environment5-184  Siemens AG, 2003. All rights reservedSINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition5.2 System environmentThe SINUMERIK 840D and HLA module are supplied via the device busfrom the SIMODRIVE mains supply module or the SIMODRIVE monitoring mod-ule (may only be installed in conjunction with a mains supply module as an ex-tended power supply). No provision has been made for any other type of volt-age supply and failure to use the supply provided could damage the unit.NoteIt is not permissible to operate an HLA module on its own on a SIMODRIVEmonitoring module!Power is supplied to downstream electrical axes via the DC link busbars(40 mm2 ) of the carrier module.For information about the electrical supply conditions for the power supply ormonitoring module, as well as recommended circuits, technical data and settingoptions, please see Chapter 2 andReferences: /PJ2/ SIMODRIVE Planning GuideSIMODRIVESIEMENSMainssupplymoduleDevice busX101X102NCU(840D)X35X34X111X112X121X122Bus terminatorDrive busHLAFig. 5-5 Component layout for hydraulic driveMains connection5 Hardware Drive Functions 02.99