Siemens SINUMERIK Series Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

Entry DescriptionPartition Partition number on the USB storage medium,e.g. 1 or all.If a USB hub is being used, then specify theUSB port of the hub.USB path Path to the USB hub.Note:This value is not currently evaluated.Specifications for local drivesEntry DescriptionSymbolic Symbolic drive name.Assignment of the names under DetailsAdditional parameters under DetailsUse drive as: LOCAL_DRIVE The activation of the checkbox assigns thesymbolic name to the drive.If an assignment exists already for the drive,no change can be made.All checkboxes are active as preassignment.CF_CARDSYS_DRIVESpecifications for network drivesEntry DescriptionComputer name Logical name of the server or the IP address.Release name Only for network drives inWindows systems.Name, under which the network drive was re‐leasedPath Start directory.The path is specified relative to the releaseddirectory.User namePasswordEnter the user name and the correspondingpassword for which the directory is enabled onthe server.The password is displayed in encoded formas string of "*" characters and is stored in the"logdrive.ini" file.Symbolic Symbolic drive name.Maximum 12 characters can be entered (let‐ters, digits, underscore).The names NC, GDIR and FTP are reserved.They are also used to label the softkey if asoftkey text is not specified.Managing programs14.12 Set up drivesMilling778 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0