Siemens SINUMERIK Series Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

G code program parameters ShopMill program parametersPL Machining plane T Tool nameD Cutting edge numberF Feedrate mm/minmm/revS / V Spindle speed or constant cuttingraterpmm/minParameter Description UnitTC Name of the swivel data recordRetraction No No retraction before swivelingIncremental retraction in tool directionThe retraction path is entered into parameter ZR.Maximum retraction in tool directionRetraction in the direction of machine axis ZRetract towards the machine axis Z and then in the directionX, YZR Retraction path - (only for incremental retraction in the tool direction)Swivel plane ● New: New swivel plane● Additive: Additive swivel planeX0 Reference point for rotation XY0 Reference point for rotation YZ0 Reference point for rotation ZSwivel mode ● Axis by axis: Rotate coordinate system axis-by-axis● Solid angle: Swivel via solid angle● Proj. angle: Swiveling via projection angle● Direct: Directly position rotary axesAxis sequence Sequence of the axes which are rotated around: - (only for axis-by-axis swivel mode)XYZ or XZY or YXZ or YZX or ZXY or ZYXX Rotation around X - (only for axis sequence) DegreesY Rotation around Y DegreesZ Rotation around Z DegreesProjection position Position of the projection in space - (only for swivel mode, projection angle)Xα, Yα, Zβ or Yα, Zα, Zβ or Zα, Xα, ZβXα Projection angle - (only for projection position) DegreesYα Projection angle DegreesZβ Angle of rotation in theplaneDegreesProgramming technological functions (cycles)10.6 Further cycles and functionsMillingOperating Manual, 08/2018, 6FC5398-7CP41-0BA0 639