Configuring the SIMATIC Field PG P45-14 SIMATIC Field PG P4 ManualA5E00180080-045.3 The Advanced MenuMenu StructurePhoenixBIOS Setup UtilityItem Specific HelpInstalled O/S:ESC ExitReset Configuration Data:Select ItemSelect Menu + / – SelectChange ValuesSub-MenuF9F10Setup DefaultsSave and ExitIRQ Resource ExclusionSerial port A: [Auto]S5 TTY port: [Enabled][ No ]Select the operatingsystem installedon your system whichyou will use mostcommonly.Note: An incorrectsetting can causesome operatingsystems to displayunexpected behavior.EnterHelpF1Security Power Boot Version ExitMain[ WinXP/2000 ]Local Bus IDE adapter: [Primary & Secondary]AdvancedLegacy USB Support: [Disabled]Parallel port: [Disabled]Mode: [Bi-directional]Base I/O address: [378]Interrupt: [IRQ 7]Fig. 5-9 ”Advanced” MenuSettings in the Advanced MenuInstalled O/S Plug & play means that all modules are automatically detectedand installed, providing they support the Plug&Play functionality.[other] BIOS handles the entire Plug&Play capability, defaultconfiguration[Win95] The operating system handles a part of the Plug& Play[Win98] functions[WinXP/2000]Reset ConfigurationData[Yes] All installations under Plug&Play are deleted andreconfiguration is triggered the next time the systemboots. The entry is then reset to [No]. Systemcomponents that do not support Plug&Play have to beentered manually.[No] The Plug&Play system components are initializedafter the next system start.Serial port A Configure Serial Port A with the options:[Disabled] No configuaration[Enabled] User configuration[Auto] BIOS or OS chooses confuguration.
