Configuring the SIMATIC Field PG P45-3SIMATIC Field PG P4 ManualA5E00180080-04Screen Display Following Power OnWith the standard setting of your PG, the screen displays after power-on, forexample:Phoenix NoteBIOS 4.0 Release 6.0 –A5E0001xxxx-ES00xCopyright 1985-2002 Phoenix Technologies Ltd.All Rights ReservedSIEMENS Field PG P4 Version Vxx.xx.xxCPU = Mobile Intel(R) Pentium(R)4 – M CPU 1.60GHz640K System RAM Passed61M Extended RAM Passed512K Cache SRAM PassedFixed Disk 0: FUJITSU MHK2060ATATAPI CD–ROM: TOSHIBA CD–ROM XM–1902BMouse initializedPress to enter SETUP or to show BootmenueNoticeAll information on on-screen displays and menu displays are samples. Deviationsto this example are possible.Press the F2 key while the above display is shown, to select the ROM-based BIOSsetup program. In this program, you can set a number of system functions andhardware configurations of your programming device.The standard settings are effective on delivery. You can change these settingsusing the BIOS setup. The modified settings become effective when you havesaved them and terminated the BIOS setup.
