Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 DCS (Euro) Keyset User Guide– 50 –CUSTOMISING YOUR KEYSETAME BGMIf you are using Answering Machine Emulation (AME), this feature selectswhether you will hear your personal greeting or Background Music (BGM)while callers are listening to your personal greeting. A BGM source must beselected for this to work. This feature only applies if there is a Cadence orSVMi-8 Voice Mail card installed in the system and your keyset has a pro-grammed AME key.1. While the handset is on-hook, dial TRSF 110.2. Press 091 to turn on AME BGM or 090 to turn it off.3. Press TRSF to store your selection.AME PASSWORDIf you are using Answering Machine Emulation (AME), this feature allows youto enable password protection. This will prevent unauthorised people fromlistening to messages being left for you. The passcode is the same as yourstation passcode. This feature only applies if there is a Cadence or SVMi-8card installed in the system and your keyset has a programmed AME key.1. With the handset on-hook, dial TRSF 110.2. Dial 101 to turn on AME PASSCODE or 100 to turn it off.3. Press TRSF to store your selection.SELECT RING TONEYou can select one of eight ring tones for your keyset.1. While on-hook, dial TRSF 111.2. Dial a number 1–8 or press the VOLUME keys to hear each tone.3. When you hear the tone that you want, press the TRSF key.Note: Specific lines or stations may be programmed to ring your keyset with adifferent tone to that selected for your keyset.