Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 DCS (Euro) Keyset User Guide– 32 –ß When you hear a busy signal, press the RETRY key.The system will reserve the line and automatically redial the same number foryou. You will hear the call being made through the speaker. The microphoneis muted.ß When the called party answers, you must pick up the handset or pressthe SPEAKER key to begin speaking.Note:• If you make another call, auto-redial is cancelled.• To cancel a retry, lift and replace the handset.PULSE TO TONE CHANGEOVERWhen making an outside call on a dial pulse line, press #. All digits dialledafter the # will be sent as tones.MEMO DIALLING(‘L’ VERSION SYSTEMS ONLY)When, during an outside call, you are enquiring for a phone number or takinga message, you can store the number or message you are given as a“memo” for later use. There is no need to write it down.1. While on an outside call, press the MEMO soft key.2. Dial the number or type the message (using the keypad) as it is dictatedto you.3. Press the RETURN soft key to save the number/message.When your conversation is finished and the handset replaced, you can viewthe number/message you saved:1. Dial TRSF 113.2. Use the VOLUME keys to scroll through the numbers/messages saved asmemos.