Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 DCS (Euro) Keyset User Guide– 28 –DIALLING FEATURESSome dialling features can be accessed using programmable keys or featureaccess codes only. Others can be accessed using programmable keys, fea-ture access codes, or the soft key menus on the LCD. Use of the soft keymenus is described at the beginning of this guide (see the section “ThingsYou Should Know” ).SPEED DIALLINGYou can dial a pre-programmed telephone number stored in the system-widespeed dial list of numbers (500–999) or from your personal list of speed dialnumbers (00–49, see Programming Personal Speed Dial Numbers, below).1. While on-hook, press the MEMORY key.ORPress the SPD key (if assigned)ORDial 16.2. Dial the desired speed dial number.The telephone number is automatically dialled for you.Note: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before you begin dialling.PROGRAMMING PERSONAL SPEEDDIAL NUMBERSYou can program frequently-dialled telephone numbers in your personalspeed dial list. An extension has 10 (00–09) speed dial numbers by defaultbut may be assigned up to fifty (00-49). Your system administrator can tellyou how many are assigned to your extension.1. While on-hook, press the TRSF key and dial 105.2. Dial a speed dial number (00–49).3. Dial a line or line group access code.