Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 DCS (Euro) Keyset User Guide– 16 –CALL PROCESSINGSYSTEM HOLDß When you are connected to a call, press the HOLD key. The call will goon hold and flash green at your keyset. If this call appears on a line keyat other keysets, it will flash red at those keysets.ß To take the call off hold, press the flashing CALL key and the green lightwill go steady green again. Resume your conversation.Note: While on a call, pressing a line key, route key or a flashing CALL key willautomatically put your first call on hold and connect you to the new call. See Auto-matic Hold in the section “Customising Your Keyset”.EXCLUSIVE HOLDTo place an outside call on hold at your phone so that other users cannotaccess it:ß Press the HOLD key twice. The call will flash green on your keyset andthis line will show a steady red light on other keysets.ß To retrieve the call, press the flashing green line key.Note: Internal calls are always placed on exclusive hold.REMOTE HOLDWhen you wish to place a call on hold at another station.1. Press TRSF and dial the extension number, or press the appropriateDSS key.2. Press the HOLD key. This will place the call on system hold on an avail-able Call or line key at the remote station and return you to dial tone.