Menu
Samsung WA50K8600A Series User Manual
Also see for WA50K8600A Series: User manual
                                                                                                                                                                                                                  |
English 25InstallationA*NOTEConnect the hose guide (A) within 4 in (10cm)* from the end of the drain hose. If thedrain hose is extended more than 4 in (10cm) beyond the end of the hose guide, moldor microorganisms could spread to theinside of the washer.NOTEThe drain hose can be installed to a 96in (245 cm) maximum, but the drainingcapability can be reduced at this height.It can cause the washer to have an odorbecause of remaining water in the drainsystem.NOTEIf the drain hose is installed below 39 in (99cm), water can be drained in cycles due to asiphon phenomenon. It causes the washer todisplay “4C”.STEP 4 Leveling your washerASee if the washer is level by checking theposition of the tub:1. Slide the washer into position.2. Open the lid of the washer, and pourthe water into the tub to just below thepulsator level.NOTEWA50K8600A* models have the Built-in sinkover the pulsator level. That’s why the levelis not revealed. Open the Built-in sink andcheck the level with eyes. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved