Menu
Samsung WA50K8600A Series User Manual
Also see for WA50K8600A Series: User manual
                                                                                                                                                                                                                  |
English 23Installation4. Connect the ends of the water supplyhoses to the water supply intakeconnections at the back of the washer.CAUTIONThe water supply hose connected to the hotfaucet must be connected to the hot watersupply intake and the water hose connectedto the cold faucet must be connected to thecold water supply intake.5. Tighten the fittings by hand until theyare snug, and then tighten them anadditional two-thirds of a turn with awrench.NOTETo ensure the correct water usage, connectboth the hot and cold water faucets. If eitheror both are not connected, an “4C” (no fill)code can be displayed.NOTEIf you do not want to use the hot watersupply hose, insert the water intake capinto the hot water supply intake hole. Inthis case, you must select the Tap Coldfor the water temperature. If you selectthe Tap Cold, all the lamps for the watertemperature options are turned off.CAUTIONConfirm that the water supply hoses are nottwisted or bent. If the hoses are twisted orbent, the hoses can leak and cause electricshock due to the water leakage.6. Turn on the hot and cold water suppliesand check all the water supply intakeconnections and the faucets for waterleaks. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved