Menu
Samsung Smart MBS RRH-P4 Installation Manual
                                                                                                                                                                  |
Ver.CHAPTER 2. Installation of RRH-P42-4 © SAMSUNG Electronics Co., Ltd.2600-00CTEIGAA 4.02.4 Cable Gland Assembly and Cable InstallationCaution when assembling the cable glandEnsure that all parts of the cable gland are assembled in the correct sequence.Incorrect assembly may result in influx of external air or moisture into the systemand may cause corrosion, system malfunction and/or critical failure of the coolingsystem.Caution when installing the cable in the cable glandOnly one cable of permitted specification (radius) should be installed in the cablegland.- Installing a cable of smaller radius than the permitted specification may result ininflux of external air or moisture into the system and may cause corrosion orsystem malfunction.- Installing a cable thicker than the permitted specification or installing two ormore cables in the gland may damage the gland.Caution when loosen and tighten the Cable Gland NutIn case of assembling the cable gland and cabling, do not loosen and tighten byturning the cable gland body or other parts. turning the cable gland body maycause corrosion and system failure by entering of any external air and moisture.Tighten the Cable Gland Nut by Using Torque WrenchCable gland nut should be tightened by using torque wrench and the torque valuemeets standard.Cable Gland NutCable Gland BodyTorque WrenchTorque WrenchTorque Wrench |
Related manuals for Samsung Smart MBS RRH-P4
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved