Menu
Samsung Smart MBS RRH-P4 Installation Manual
                                                                                                                                                                  |
Ver.Smart MBS RRH-P4 Installation Manual© SAMSUNG Electronics Co., Ltd. F-12600-00CTEIGAA 4.0ANNEX F. Standard TorqueWhen you fasten the bolt, refer to the standard torque value below to prevent the equipmentand bolt from damage and fasten tightly. When the torque value for each connection part isdefined already, refer to the defined value.Table F.1 Standard Torque Value for Tightening BoltsBolt Spec. Torque (kgf.cm) Torque (N.m) Torque (lbf.ft)M3 4.08~6.12 0.40~0.60 0.29~0.44M4 9.52~14.28 0.93~1.40 0.69~1.03M5 20.0~30.0 1.96~2.94 1.45~2.17M6 33.28~49.92 3.26~4.90 2.41~3.61M8 82.4~123.6 8.08~12.12 5.96~8.94M10 166.4~249.6 16.32~24.48 12.03~18.05M12 292.0~438.0 28.64~42.65 21.11~31.67Table F.2 Brass Bolts TorqueBolt Spec. Torque (kgf.cm) Torque (N.m) Torque (lbf.ft)M6 29.98 ± 10 % 2.94 ± 10 % 2.17 ± 10 %M8 64.26 ± 10 % 6.3 ±1 0 % 4.16 ± 10 %Check When Applying standard torque valueThe torque value can change depending on the equipment and materials,properties and specifications of the fastening bolts. Therefore, you must check theappropriate torque value of each equipment and fastening bolts according to itsspec. |
Related manuals for Samsung Smart MBS RRH-P4
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved