1993. Useful Setting MenusFax menu3Fax FeatureSome menus may not appear in the display depending on options ormodels. If so, it is not applicable to your machine (see "Menu overview" onpage 33).To change the menu options:• Press (fax) > (Menu)> Fax Feature on the control panel.• Or press Setup > Machine Setup > Default Setting > Fax Default on thetouch screen.• Or press Fax > select the menu item you want on the touch screen.Item Description• Scan Size• Original SizeSets the image size.ContrastAdjusts the contrast level to scan an original that iseasier to read, when the original contains too faint ortoo dark contents.DarknessAdjusts the brightness level to scan an original that iseasier to read, when the original contains faintmarkings and dark images (see "Darkness" on page 68).ResolutionThe default document settings procedure good resultswhen using typical text-based originals. However, if yousend originals that are of poor quality, or containphotographs, you can adjust the resolution to producea higher quality fax (see "Resolution" on page 68).Duplex prints the received fax on both sides of paper.Multi SendSends a fax to multiple destinations (see "Sending a faxto multiple destinations" on page 66).You cannot send a color fax using this feature.Delay SendSets your machine to send a fax at a later time when youwill not be present (see "Delaying a fax transmission" onpage 256).You cannot send a color fax using this feature.Priority SendScans the original into memory and immediatelytransmits it when the current operation is finished.Priority transmission will interrupt a sending to multipledestinations between stations (example, when thetransmission to station A ends, before transmission tostation B begins) or between redial attempts (see"Sending a priority fax" on page 257).Item Description
