Wired network setup1422. Using a Network-Connected Machine6 Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window.7 Enter the machine’s new information into the configuration window asfollows. In a corporate intranet, you may need to have this informationassigned by a network manager before proceeding.Find the machine’s MAC address from the Network Configuration Report(see "Printing a network configuration report" on page 141) and enter itwithout the colons. For example, 00:15:99:29:51:A8 becomes0015992951A8.8 Click Apply, and then click OK. The machine will automatically print theNetwork Configuration Report. Confirm that all the settings arecorrect.IPv4 configuration using SetIP (Macintosh)Before using the SetIP program, disable the computer firewall from SystemPreferences > Security > Firewall.The following instructions may vary from your model.1 Connect your machine to the network with a network cable.2 Insert the Installation CD-ROM, and open the disk window, selectMAC_Installer > MAC_Printer > SetIP > SetIPapplet.html.3 Double-click the file and Safari will automatically open, then selectTrust. The browser will open the SetIPapplet.html page that shows theprinter’s name and IP address information.4 Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window.5 Enter the machine’s new information into the configuration window. Ina corporate intranet, you may need to have this information assigned bya network manager before proceeding.
