Wireless network setup1812. Using a Network-Connected Machine• After completing the wireless network connection, you need to install amachine driver to print from an application (see "Installing driver overthe network" on page 144).• See your network administrator, or the person that set up your wirelessnetwork, for information about your network configuration.Items to prepare• Access point• Network-connected computer• Software CD that was provided with your machine• A machine installed with a wireless network interface• Network cablePrinting a network configuration reportYou can identify the network settings of your machine by printing a networkconfiguration report.See "Printing a network configuration report" on page 141.IP setting using SetIP Program (Windows)This program is used to manually set the network IP address of your machineusing its MAC address to communicate with the machine. The MAC address isthe hardware serial number of the network interface and can be found in theNetwork Configuration Report.See "Setting IP address" on page 141.Configuring the machine’s wireless networkBefore starting you will need to know the network name (SSID) of your wirelessnetwork and the network key if it is encrypted. This information was set whenthe access point (or wireless router) was installed. If you do not know about yourwireless environment, please ask the person who set up your network.To configure wireless parameters, you can use SyncThru™ Web Service.Using SyncThru™ Web ServiceBefore starting wireless parameter configuration, check the cable connectionstatus.
