CHAPTER 14. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.4-28 © SAMSUNG Electronics Co., Ltd.WTSTxyy Test item: This command enables to enter/end the test mode when testing the 4WLIboard.When executing WMEMx, WDMCx, WTCMx, WRSWxy which are the commandsrelated to 4WLI, this command(WTSTxy) should be used for starting, and after therelated commands are completely executed, the test mode should be ended by using theWTSTxy command.‘xy’ is the information on the location where the 4WLI board is mounted and theinformation on controlling to enter the test mode.1) x: Slot numbery Slot number: 0~4y When mounting on the slot 1: 0y When mounting on the slot 2: 1y ………………………y When mounting on the slot 5: 42) y: Information on entering and ending the test modey When entering the test mode: 1y When ending the test mode: 0y Result display− PASS: The command is entered and the test for the corresponding 4WLI board isnormally performed.− FAIL: The command is not processed normally.WMEMxy Test item: This checks the memory(DPRAM, SRAM, Flash Memory) of the 4WLIboard. ‘x’ is the location where the 4WLI board is mounted.1) x: Slot numbery Slot number: 0~4y Result display− PASS: The memory status of the corresponding 4WLI board is normal.− DPRAM: The DPRAM status of the corresponding 4WLI board is abnormal.− SRAM: The SRAM status of the corresponding 4WLI board is abnormal.− FLASH: The Flash Memory status of the corresponding 4WLI board is abnormal.
