39PIP On/Off control• FunctionThe PIP mode of a product can be turned on or off using a PC.― Only available on models that have the PIP function.― The mode cannot be controlled if Video Wall is set to On.• Viewing PIP on/off state (Get the PIP ON / OFF Status)Header Command ID Data length Checksum0xAA 0x3C 0• Setting PIP on/off (Set the PIP ON / OFF)Header Command ID Data length Data Checksum0xAA 0x3C 1 "PIP""PIP": A code used to turn the PIP mode of a product on or off1: PIP ON0: PIP OFF• AckHeader Command ID DatalengthAck/Nak r-CMD Val1 Checksum0xAA 0xFF 3 'A' 0x3C "PIP""PIP": A code used to turn the PIP mode of a product on or off• NakHeader Command ID DatalengthAck/Nak r-CMD Val1 Checksum0xAA 0xFF 3 'A' 0x3C "PIP""ERR": A code showing what error has occurredAuto adjustment control (PC and BNC only)• FunctionAutomatically adjust the PC system screen using a PC.• Viewing auto adjustment state (Get Auto Adjustment Status)None• Setting auto adjustment (Set Auto Adjustment)Header Command ID Data length Data Checksum0xAA 0x3D 1 "AutoAdjustment""Auto Adjustment" : 0x00 (at all times)• AckHeader Command ID DatalengthAck/Nak r-CMD Val1 Checksum0xAA 0xFF 3 'A' 0x3D "AutoAdjustment"• NakHeader Command ID DatalengthAck/Nak r-CMD Val1 Checksum0xAA 0xFF 3 'A' 0x3D "ERR""ERR": A code showing what error has occurred
