136SystemChapter 09SetupMENU m → System → Setup → ENTER ESystemSetupMulti ControlTimeFront Logo LightMenu LanguageRotate MenuDevice ManagerOffEnglishLandscape- The displayed image may differ depending on the model.Initial settings (Setup)After powering on the product for the first time, configure basic settings such as the language, channel and time.Press the button. Setup is available only when Source is set to TV.1 Selecting a languagePress the or button, and then press the E button. Specify the OSD menu language.2 Network SettingsSet up your network connection. Press the E button to start. If you do not know your network set up information orwant to set to it later, select Skip. You can set up the network connection later using the Network menu.3 Selecting search options for Auto ProgramPress the or button, then press the E button. Select the channel source to memorize. When setting the antennasource to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For moreinformation, refer to Channel → Auto Program.4 Setting the Clock ModeSet the Clock Mode automatically or manually.- Auto: Allows you to select time zone and DST (Daylight Savings Time).- Manual: Allows you to manually set the current date and time.5 The basic settings are completed.Press the E button.
