125Wired Network SettingsSet the network connection to use Internet services such as perform software upgrades.Automatic Network SettingsConnect to the network using a LAN cable.Make sure a LAN cable is connected first.How to set up automatically1 Go to the Network Settings screen. Select Start, press E, and then press E again.2 The network test screen appears and verifies the network connection.When the connection has been verified, the “Wired network and Internet connection completed.” message appears.― If the connection process fails, check the LAN port connection.― If the automatic process cannot find the network connection values or if you want to set the connection manually, go to the next section, network setup.
