Samsung LN32A540P2DXZAOM User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

English - 60Problem Possible SolutionHorizontal bars appear to flicker,jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning.Vertical bars appear to flicker,jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning.Screen is black and powerindicator light blinks steadily. On your computer check: Power, Signal Cable.The TV is using its power management system.Move the computer's mouse or press any key on the keyboard.Image is not stable and mayappear to vibrate when you havea computer connected to the PCinput.If the setting is not correct, use your computer utility program to change the display settings.Your TV supports multiscan display functions within the following frequency domain:Horizontal frequency (kHz) 30~60Vertical frequency (Hz) 60~75PC Maximum refresh rate(at 60 Hz) 1360 X 768Image is not centered on thescreen. Adjust the horizontal and vertical position.The screen position must be adjusted on the output source (i.e. STB) with a digital signal.The picture appears distorted in thecorner of the screen.If "Just Scan" is selected with some external devices, the picture may appear distorted in thecorner of the screen. This symptom is caused by the external devices, not TV.The “Resets all settings to the defaultvalues” message appearsThis appears when you press and hold the EXIT button for a while. The productsettings are reset to the factory defaults.This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of theproduct.