Samsung 5 Series Quick Setup Manual

Also see for OFFICESERV 500 Series: Service manual System administration guide Quick setup guide Quick setup guide Quick setup guide

Quick Setup GuideCongratulations on the purchase of your new Samsung TV.Read this setup guide to get your TV up and running quickly.1-800-SAMSUNG (1-800-726-7864)Samsung Electronics America, Inc.85 Challenger Road Ridgefield Park, NJ 07660-2112Samsung Electronics Canada Inc.55 Standish Court Mississauga, Ontario L5R 4B2Call Center hours of operation: Mon-Sun, 9:00 AM -12AM EST.To register this product, visit: www.samsung.com/register.STOPPlease do not return this unit.If you have problems operating yourTV, call:1-800-SAMSUNG (1-800-726-7864)For web support please visit:www.samsung.com/supportStep 3: Connect External DevicesConnecting an AV device (DVD/Blu-ray player, cable/satellite boxUse one of the connections below to connect your TV to an external A/V device. We reStep 4: Run Plug & PlayWhen you turn on your TV for the first time, it automatically launches the Plug &Play function. With Plug & Play, you can select the On Screen Display language,set the clock mode, and launch the TV’s channel memorizing process.It also displays connection instructions similar to those in this guide.To navigate while Plug & Play is running, press the Up, Down, Left or Right arrowbuttons on your remote. To make a selection, press the ENTERE button.To skip a screen, press the MENU button. To turn on your TV, press the POWERbutton on the remote or on the TV. To run Plug & Play, follow these steps:1 Using your remote control,select the language for the OnScreen Display (OSD), and thenpress the ENTERE button.2 Select Home Use, and thenpress the ENTERE button. If you select Store Demo, the TV will reset yourpicture and audio settings every 30 minutes.3 Select Antenna Source and Channel Source. If Antenna Source isCable or Auto, you must select Channel Source to same type as yourcable system type. After selecting source, select Search; then press theENTERE button on your remote.✎ Most cable systems are Standard(STD) systems, If you are not sureabout what kind of cable system you have, contact your cable company.✎ If your TV is attached to a cable or satellite box, skip Steps 3 through 5.After Plug & Play is complete, set your TV to Channel 3 or 4, accordingto the directions for your cable or satellite box.4 The TV memorizes the available channels. This process can take up to 45minutes.5 After the TV has memorized the channels, choose the Clock Mode. SelectAuto if you have a digital channel in your area. Select Manual if you don’t, orif you have a cable or satellite box. When done, press the ENTERE button.✎ If you select Manual, the clock setting screen appears.6 Select the daylight savings time setting: Off or On, and then press theENTERE button7 Select the time zone in which you live, and then press ENTERE button.8 After the time zone screen, The connection method for best HD screenquality is displayed. Press Right arrow button on your remote to view eachscreen in succession. Press the Blue button to skip this section.9 The Enjoy your TV. screen appears. Then press the ENTERE button.Component Cable(Not Supplied)AUDIO OUT DVI OUTAUDIO OUTCOMPONENT OUTUsing an HDMI to DVI CableHD connection (up to 1080p)Very Good ConnectionDeviceUsing a Component CableGood ConnectionComponent connection (up to 1080p)DeviceAudio Cable(Not Supplied)HDMI to DVI Cable(Not Supplied)Audio Cable(Not Supplied)DVD, Blu-ray player, cable box, STB satellite receiver, VCRStep 1: Install the Batteries into the RemoteTo install batteries into your remotecontrol, follow these steps:1. Lift the cover on the back of theremote upward as shown in the figureto the right.2. Install two AAA batteries.✎ Make sure to match the + and -ends of the batteries to the diagram in the battery compartment.3. Replace the cover.Step 2: Connect Power and Antenna or CableVHF/UHF AntennaConnect Ant In to• Wall cable jack• VHF/UHF Antenna• Cable or Satellite boxAnt or Cable OutMake sure the AC power cord is plugged in securely tothe wall outlet and the TV.Use a 75 ohm (round) cable.orU Move E EnterSelect Language of the OSD.Menu Language :Plug & PlayEnglishEspañolFrançaisAll manuals and user guides at all-guides.comall-guides.com

/ 2

Related manuals for Samsung OFFICESERV 500 Series