Samsung HT-H4500K User Manual

Also see for HT-H4500K: User manual

9 - EnglishConnectionsInstalling the Speakers on the Tallboy Stand* HT-H4530K only - Front Speakers1. Turn the Stand Base upside-down andconnect it to the Stand.2. Use the driver to combine the screws on the3 marked holes.3. Straighten a supplied speaker wire and put inthe hole on the centre of Stand Base.4. Connect the upper Speaker to the assembledStand.5. Insert a screw clockwise into the hole on therear of the speaker using a screwdriver.And then connect a speaker cable.6. This is the appearance after the speaker isinstalled.Follow this steps to install other speaker.2413Stand BaseStandSpeakerStand5 6Speaker Cable Connections* HT-H4530K only - Front Speakers1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on eachbundle to the coloured sticker on the bottom of each speaker.2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colours ofthe speaker plugs to the colours of the speaker jacks.