Samsung HT-H4500K User Manual

Also see for HT-H4500K: User manual

28 - EnglishPlaying Content5. Play music on the connected device.• You can listen to the music playing on theconnected Bluetooth device over the HomeCinema system.✎ The Home Cinema only supports MiddleQuality SBC data (up to 237kbps@48kHz),and does not support High Quality SBC data(328kbps@44.1kHz).✎ The AVRCP feature is supported. It's functionalitywill differ, depending on the specifications of theconnected device.✎ Connect only to a Bluetooth device that supportsthe A2DP Profile.✎ Only one Bluetooth device can be paired at atime.✎ The search or connection functions may not workproperly in the following cases:- If there a strong electric field near or around thehome cinema.- If several Bluetooth devices are simultaneouslypaired with product.- If the Bluetooth device is turned off, not inplace, or malfunctions.- Note that such devices as microwave ovens,wireless LAN adapters, fluorescent lights, andgas stoves use the same frequency range asthe Bluetooth device, and can cause electricinterference.✎ For the good compatibility of Bluetooth or anyother devices like Mobile Phone, we recommendyou update the device's lastest version.To Disconnect the Bluetooth Device from theHome CinemaYou can disconnect the Bluetooth device from theHome Cinema. For instructions, refer to the Bluetoothdevice's manual.• When the Home Cinema is disconnected from theBluetooth device, the Home Cinema will displayDISCONNECTED on the front display.To Disconnect the Home Cinema from theBluetooth DevicePress the ( ) button on the front panel of the HomeCinema to switch from BT to another mode or turnoff the Home Cinema.• Except when you disconnect the Home Cinemaby changing functions, the connected Bluetoothdevice will wait a certain time for a responsefrom the Home Cinema before terminating theconnection. (Disconnection time may differ,depending on the Bluetooth device.)✎ In Bluetooth connection mode, the Bluetoothconnection will be lost if the distance between theHome Cinema System and the Bluetooth deviceexceeds 10 meters. When the Bluetooth devicecomes back into effective range or you restart theBluetooth device, you have to pair the device andhome cinema again to reconnect.✎ In Bluetooth mode, the screen saver will start ifthe Bluetooth device stays in the Ready state for5 minutes. To reconnect the Bluetooth device,turn off the screen saver, and then connect thedevice. To turn off the screen saver, press anybutton on the remote control (the Volume button,a number button, etc.)Using the Bluetooth Power OnWhen the home cinema is turned off, connectingyour smart device to the product via a Bluetoothconnection can turn the home cinema on.✎ Quick start function is available when AC PowerCord is connected to AC Source.✎ To use this function, set Settings > System >Quick start to On.✎ To use this function, Bluetooth connection betweenthe Home cinema and your smart device shouldhave been established before. In other words,the Home cinema should be found from the list ofknown Bluetooth devices of your smart device.1. Connect your smart device to the productvia Bluetooth. (For information on Bluetoothconnections, refer to your smart device’smanual.)2. Once connected, the home cinema will turn itselfon automatically in BT mode.• Select the desired music to play on your smartdevice.