Samsung HT-F5500K User Manual

Also see for HT-F5500K: User manual User manual

| 52 EnglishAppendixAdditional InformationNotesConnectionsHDMI OUT• Certain HDMI output resolutions may not work,depending on your TV.• You must have a HDMI connection to enjoy videoswith 3D technology.• A long HDMI cable may cause screen noise. If thisoccurs, set HDMI Deep Colour to Off in the menu.Settings3D Settings• For some 3D discs, to stop a movie during 3Dplayback, press the 5 button once. The moviestops and the 3D mode option is de-activated.To change a 3D option selection when you areplaying a 3D movie, press the 5 button once. TheBlu-ray menu appears. Press the 5 button again,then select 3D Settings in the Blu-ray menu.• Depending on the content and the position of thepicture on your TV screen, you may see verticalblack bars on the left side, right side, or both sides.TV Aspect Ratio• Depending on the disc type, some aspect ratiosmay not be available.• If you select an aspect ratio and option which isdifferent than the aspect ratio of your TV screen,then the picture might appear to be distorted.• If you select 16:9 Original, your TV may display 4:3Pillarbox (black bars on sides of picture).BD Wise (Samsung Products only)• When BD Wise is on, the Resolution settingautomatically defaults to BD Wise and BD Wiseappears in the Resolution menu.• If the product is connected to a device that doesnot support BD Wise, you can not use the BD Wisefunction.• For proper operation of BD Wise, set the BD Wiseoption in both the product and the TV to On.Digital Output• Be sure to select the correct Digital Output or youwill hear no sound or just loud noise.• If the HDMI device (AV receiver, TV) is notcompatible with compressed formats (Dolby Digital,DTS), the audio signal outputs as PCM.• Regular DVDs do not have BONUSVIEW audio andNavigation Sound Effects.• Some Blu-ray Discs do not have BONUSVIEWaudio and Navigation Sound Effects.• This Digital Output setup does not affect theanalogue (L/R) audio or HDMI audio output to yourTV. It affects the optical and HDMI audio outputwhen your product is connected to an AV receiver.• If you play MPEG audio soundtracks, the audiosignal outputs as PCM regardless of your DigitalOutput selections (PCM or Bitstream).• Digital Output can be activated when SpeakerSelection is set to TV Speaker.BD-Live Internet Connection• The Internet connection may be restricted while youare using BD-LIVE contents.Anynet+ (HDMI-CEC)• Depending on your TV, certain HDMI outputresolutions may not work. Please refer to the usermanual of your TV.• This function is not available if the HDMI cable doesnot support CEC.• If your Samsung TV has an Anynet+ logo, then itsupports the Anynet+ function.BD Data Management• In the external memory mode, disc playback maybe stopped if you disconnect the USB device in themiddle of playback.• Only those USB devices formatted in the FAT filesystem (DOS 8.3 volume label) are supported.We recommend you use USB devices that supportUSB 2.0 protocol with 4 MB/sec or faster read/writespeed.• The Resume Play function may not work after youformat the storage device.• The total memory available to BD Data Managementmay differ, depending on the conditions.