Samsung HT-F5500K User Manual

Also see for HT-F5500K: User manual User manual

English 39 |05 Media Play• This wireless device may cause an electric interferenceduring its operation.To connect the Home Cinema to aBluetooth deviceConnectBluetooth deviceCheck if the Bluetooth device supports the Bluetoothcompliant stereo headset function.1. Press the FUNCTION button on the remote controlof the product to display the BT message.2. Select the Bluetooth menu on the Bluetooth deviceyou want to connect. For instructions, refer to theBluetooth device's manual.3. Select the Stereo headset menu on the Bluetoothdevice.• You will see a list of devices.4. Select "[HTS]Fxxxxx" from the searched list.• When the Home Cinema is connected to theBluetooth device, the device name of theconnected Bluetooth device, followed by thename of home cinema will appear on the frontdisplay of home cinema.5. Play music on the connected device.• You can listen to the music playing on theconnected Bluetooth device over the HomeCinema system.| NOTES | The Home Cinema only supports Middle Quality SBCdata (up to 237kbps@48kHz), and does not supportHigh Quality SBC data (328kbps@44.1kHz). The AVRCP feature is supported. It's functionalitywill differ, depending on the specifications of theconnected device. Connect only to a Bluetooth device that supports theA2DP Profile. Only one Bluetooth device can be paired at a time. The search or connection functions may not workproperly in the following cases:- If there a strong electric field near or around thehome cinema.- If several Bluetooth devices are simultaneouslypaired with product.- If the Bluetooth device is turned off, not in place, ormalfunctions.- Note that such devices as microwave ovens, wirelessLAN adapters, fluorescent lights, and gas stoves usethe same frequency range as the Bluetooth device,and can cause electric interference.To disconnect the Bluetooth device fromthe Home CinemaYou can disconnect the Bluetooth device from the HomeCinema. For instructions, refer to the Bluetooth device'smanual.• When the Home Cinema is disconnected from theBluetooth device, the Home Cinema will displayDISCONNECTED on the front display.To disconnect the Home Cinema from theBluetooth devicePress the ( ) button on the front panel of the HomeCinema to switch from BT to another mode or turn offthe Home Cinema.• Except when you disconnect the home cinema bychanging functions, the connected Bluetooth devicewill wait a certain time for a response from theHome Cinema before terminating the connection.(Disconnection time may differ, depending on theBluetooth device.)| NOTES | In Bluetooth connection mode, the Bluetoothconnection will be lost if the distance between theHome Cinema System and the Bluetooth deviceexceeds 10 meters. When the Bluetooth devicecomes back into effective range or you restart theBluetooth device, you have to pair the device andhome cinema again to reconnect. In Bluetooth mode, the screen saver will start ifthe Bluetooth device stays in the Ready state for 5minutes. To reconnect the Bluetooth device, turn offthe screen saver, and then connect the device. To turnoff the Screen saver, press any button on the remotecontrol (the Volume button, a number button, etc.)