Samsung HT-F5500K User Manual

Also see for HT-F5500K: User manual User manual

| 16 EnglishConnections5. Insert a screw clockwise into the hole on the rear of the speakerusing a screwdriver.And then connect a speaker cable.6. This is the appearance after the speaker is installed.Follow this steps to install other speaker.Installing the Speakers on the Tallboy Stand* HT-F5530HK only - Front Speakers* HT-F5550HK only - Front/Surround Speakers1. Turn the Stand Base upside-down and connect it to the Speaker.2. Use the driver to combine the screws on the 3 marked holes.Installing a speaker is finished. Follow the same steps to installother speakers.3. If you want to adjust the height of the speaker, loosen a screwon the rear of the speaker base first.4. Pull up the speaker in the arrow direction. (Be careful as anexcessive force may result in a physical damage.)5. Fit the speaker in a height adjusting a hole, and then use a screwto fasten a speaker.6. This is appearance of after the speaker is installed and heightadjusted. To adjust height of other speakers, follow the step 3 ~ 5.Connecting The Speakers1. Match each speaker cable bundle to the correct speaker by matching the colour codedplug on each bundle to the coloured sticker on the bottom of each speaker.2. To attach speaker wire to each speaker:a. Press down the red tab on the back of the speaker, insert the red wire, and thenrelease the tab.b. Press down the black tab on the back of the speaker, insert the black wire, and thenrelease the tab.3. Connect the speaker wire plugs from each speaker to the back of the product bymatching the colours of the speaker plugs to the colours of the speaker jacks.Black RedStand BaseSpeaker3 425 61or5 6