《67》Digimax Master● Movie edit : You can combine a still image, movie clip, narration, and music filestogether in a single file.- Movie clip edit functions are listed below.① Edit menu : You can select the following menus.[Add Media] : You can add other media elements to a movie.[Edit Clip] : You can change the brightness, contrast, colour and saturation.[Effects] : You can insert an effect.[Set Text] : You can insert texts.[Narrate] : You can insert a narration.[Produce] : You can save the edited multi media as a new file name. You canselect AVI, Windows media (wmv), Windows media (asf) andmovie clip for this camera (avi, MPEG-4) file types.② Frame display window : You can insert multi media in this window.※ Some movie clips that were compressed with a codec that is not compatible withthe Digimax Master can’t be played back in the Digimax Master.※ Refer to the [Help] menu in Digimax Master for further information.FAQ■ Please check the following if the USB connection malfunctions.Case 1 USB cable is not connected or it is not the supplied USB cable.→ Connect the supplied USB cable.Case 2 The camera is not recognised by your PC.Sometimes, the camera may appear under [Unknown Devices] inDevice Manager.→ Install the camera driver correctly.Turn off the camera, remove the USB cable, plug in the USB cableagain, and then turn on the camera.Case 3 There is an unexpected error during file transfer.→ Turn the camera power off and on again. Transfer the file again.Case 4 When using a USB hub.→ There may be a problem in connecting the camera to the PC througha USB hub if the PC and the hub are not compatible. Wheneverpossible connect the camera directly to the PC .Case 5 Are other USB cables connected to the PC?→ The camera may malfunction when it is connected to the PC at thesame time as other USB cables. In this case, disconnect the otherUSB cables from the computer and only connect the one USB cablefrom the camera to the PC.①②